 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
OIL PAN PLATE REPLACEMENT - CONTINUED
0034 00
INSTALLATION
1.
Install oil pickup tube (7) and new seal (8) to oil pan plate (3).
2.
Install new lock (5) and capscrew (6) to secure oil pickup tube (7) on oil pan plate (3). Bend lock up.
3.
Wipe surface of oil pan plate (3) clean.
WARNING
Exposure to silicone RTV compound may be hazardous to your health. Contact with eyes can cause severe
irritation and burns. Compound can be absorbed into the skin and can cause irritation or skin sensitiza-
tion. Inhalation of vapors can cause respiratory tract irritation; prolonged inhalation can result in an aller-
gic reaction. Vapors are combustible. Do not use near open flame. Wear eye and skin protection and avoid
inhalation of vapors. Use only in a well-ventilated area. Failure to follow this warning can cause injury or
death.
4.
Lightly coat both sides of new gasket (4) with silicone compound. Install gasket on oil pan plate (3).
NOTE
To ensure a leak-free seal, ensure capscrews are tightened evenly.
5.
Position oil pan plate (3) on engine block with 18 cap-
4
screws (1) and washers (2).
6.
Install engine oil pump (WP 0035 00).
7.
Install oil pan (WP 0033 00).
6
5
7
3
8
2
1
387-926
END OF WORK PACKAGE
0034 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals