 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FLYWHEEL HOUSING MAINTENANCE - CONTINUED
0031 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Flywheel housing weighs approximately 350 lb (159 kg).
4.
Fasten lifting equipment to flywheel housing (6).
5.
Remove 13 capscrews (7) that hold flywheel housing (6) in place.
3
5
4
2
1
6
7
387-316
6.
Remove flywheel housing (6).
7.
Remove and discard gasket (8) from flywheel housing (6).
DISASSEMBLY
1.
Remove rear accessory drive gears (WP 0037 00).
2.
Remove four capscrews (9) and washers (10) from each side of flywheel housing (6) and remove two brackets (11).
3.
Remove plug (12).
4.
Remove plug (13).
5.
Remove four capscrews (14), cover (15) and gasket (16). Discard gasket.
6.
Remove two washers (17) and pins (18).
7.
Use a bearing puller to remove two bearings (19).
8.
If necessary, remove dowels (20 and 21) and stud (22) from flywheel housing (6).
0031 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals