 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FRONT ENGINE SUPPORT REPLACEMENT - CONTINUED
0022 00
REMOVAL - CONTINUED
CAUTION
Do NOT remove engine rear support mounting capscrews.
3.
Loosen two capscrews (1) and washers (2) that attach engine rear supports (3) at each side of flywheel housing.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Weight of engine assembly is approximately 3,000 lb (1,362 kg).
4.
Raise front of engine enough to take weight of engine off front support (4).
5.
Raise jack stands until wood cribbing is firmly against oil pan.
6.
Remove two nuts (5), washers (6) and capscrews (7) from engine front support (4).
7.
Ensure jack stands are firmly positioned against oil pan.
8.
Remove capscrews (8) and washers (9) that attach engine front support (4) to trunnion (10).
9.
Turn engine front support (4) to the right (as seen from front of engine) and remove from engine.
4
8,9
5,6
1,2
3
7
WOOD
CRIBBING
387-102
10 (HIDDEN)
387-101
0022 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals