|
| |
TM5-2410-237-10
3-10. WINCH ASSEMBLY - INSPECT.
This task covers:
a. Checking hydraulic fluid level.
b. Inspecting cable.
INITIAL SETUP
Applicable Configurations
Personnel
Required
Tractor with Winch
MOS 62E (1)
Equipment Condition
Tractor must be on level ground.
Transmission locked in neutral.
Brake lock applied.
Engine OFF.
a. Checking Hydraulic Fluid Level.
(1) Check sight gage on left side of winch.
Oil should be visible.
(2) If oil is not visible in sight gage, add oil.
b. Inspection Cable.
(1) Check cable for signs of rust, fraying,
or kinking. Contact Unit Maintenance
for replacement.
(2)
Check clevis (1), hook (2), form (3),
and clamp (4) for signs of weakness
such as cracking or bending. Contact
Unit Maintenance for replacement.
3-14
|
