|
| |
TM5-2410-237-10
b. Inching (Fine Control Operation).
Inch loads with engine speeds low and tractor stationary. Do not operate
for extended periods of time while INCHING to prevent damage to
vehicle.
(2) To inch out when the load is not heavy
enough to lower itself in the BRAKE
OFF position, move the lever slowly
towards the fully engaged REEL OUT
position until load starts to move.
(1) To inch out, move lever slowly towards
the BRAKE OFF position until load
starts to move. For precise lowering,
move lever slightly to engaged or
disengaged position as required.
Engine or torque converter may stall if line load and/or engine load is too
high when engaged.
(3) To inch in, move lever slowly towards
the fully engaged REEL IN position
until load starts to move. Increase
engine speed if necessary to raise
load.
2-44
|
