|
| |
TM5-2410-237-10
2-14. RIPPER RAISE AND LOWER.
NOTE
Normally, the engine must be running to operate the hydraulic implements,
but the ripper can be LOWERED with engine off.
a.
b.
Keep all personnel clear of vehicle
while operating ripper to avoid
personal injury.
To lower the ripper, move ripper control
lever to the right.
To raise the ripper, move lever to the left.
2-15. OPERATING TECHNIQUES FOR RIPPING.
Do not turn or back tractor while shanks are in the ground. Twisting puts
strain on the shanks and tips that may cause failure. Inspect ripper tips
frequently.
NOTE
Rip downhill whenever possible.
a. General Use.
(1) Use FIRST speed for most ripping
operations. It is better to use additional
shanks where practical, rather than to
increase speed.
(2) Always use center shank when ripping
with one shank. If material breaks up
easily, more shanks may be used.
2-38
|
