Transfer Gear Disassembly and Assembly.

l. Transfer Gear Disassembly and Assembly.

(4) Remove lockring (1).

The transfer gear case has a removal cover which

(5) Separate the bearing cage (4) from the

allows servicing the bevel pinion and bearings

bearing cage assembly (3).

without complete disassembly of the transmission.

( 6 ) Inspect the bearing (2) in the bearing cage

(1) Remove the transmission (para 2-9).

(4) and replace, if necessary.

(2) Remove bolts (1, fig. 6-65) bolts and locks

( 7 ) Inspect the piston ring-type seals (5) and

( 2 ) , l o c k r i n g (3), cage (5), and bearings (4).

replace if broken or damaged.

(3) Remove dowels (6) with a forcing screw

(8) The bearing outer race (5, fig. 6-62) in the

bearing cage assembly (3) can be removed if

( 8 ) , nut (9), washers (10), and length of pipe (11).

(4) Refer to figure 6-65 and remove the

necessary, after removing the plug (6, fig. 6-64)

transfer gear case cover with a hoist as shown.

and the dowel under the plug.

( 5 ) Remove plate (1, fig. 6-66) bolts (2), and

(9) Assemble the output shaft in the reverse

lock (3).

order of disassembly.

Key

Bolts

and

locks

Lockring

Bearing

Cage

Dowels

(hidden)

Locks

/ 8 i n - 1 6

forcing

screws

Nut

Washer

2 in. lengtht of in. id pipe

Transfer gear case cover

6-58