Figure 5-18. Fuel injection pump, removal and installation.

Figure 5-18. Fuel injection pump, removal and installation.

c. Disassembly. Refer to figure 5-19.

(3) Disconnect the oil line at the housing. Cap

or plug openings.

NOTE

Clean the fuel injection pump housing with cleaning

(4) Remove the bolts which secure the fuel

solvent (Fed. Spec. P-D-680) thoroughly before

injection pump housing to the bracket. Remove the

disassembly.

fuel injection pump housing and governor as an

(1) Remove the cap (1) and the felt washer

assembly.

(2).

(5) Remove the bolts securing the governor

housing to the fuel injection pump housing, and

separate the housings. Remove the gasket from the

mounting face.