(2) Remove the setscrews ((12), fig. 3-17.)
(3) Turn clutch over and remove flathead
c a p s c r e w s (1), remove end plate (2), exposing the
c l u t c h discs (6) and return springs (4).
(4) Lift discs (6) and separator plates (7) from
the drive hub (3).
(5) Lift drive hub (3) and clutch piston (8)
from retainer plate (11).
( 6 ) The cross drilled stud with three holes is
the cooling valve (5). Remove by unscrewing to the
l e f t and disassemble for cleaning.