 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRANSMISSION AND STEERING CLUTCH OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED 0089 00
SERVICE - CONTINUED
1.
Remove four bolts (1) from cover (2).
1
2
3
2.
Remove cover (2) from filter housing (3).
3.
Remove O-ring (4) from cover (2). Discard O-ring.
4.
Remove filter element (5) from filter housing (3). Dis-
card filter element.
5.
Siphon transmission oil from filter housing (3) and
wipe housing clean with a rag.
6.
Install new filter element (5) into filter housing (3).
NOTE
Ensure O-ring groove is clean before installing
O-ring.
Lightly coat new O-ring with clean oil before
installation.
7.
Install new O-ring (4) onto cover (2).
8.
Install cover (2) to filter housing (3) with four bolts
386-725
(1).
4 (HIDDEN)
5 (HIDDEN)
9.
Check transmission oil level and add as needed. (WP
REMOVAL
1.
Perform Service steps 1 through 6.
2.
Remove four bolts (6), washers (7), two flanges (8) and hose assembly (9) from top of filter housing (3). Remove O-ring
(10) from hose assembly and discard.
3.
Remove four capscrews (11), lockwashers (12), two flanges (13) and hose assembly (14) from base of filter housing (2).
Remove O-ring (15) from hose assembly. Discard lockwashers and O-ring.
4.
Remove nuts (16), lockwashers (17) and filter housing (3) from bracket (18). Discard lockwashers.
3
13
10 (HIDDEN)
18
3
16,17
386-726
15 (HIDDEN)
386-725
11,12
9
14
6,7
8
0089 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals