OIL PAN PLATE REPLACEMENT - CONTINUED
Install oil pickup tube (7) and new O-ring (8) to oil pan plate (3).
Install lock (5) and capscrew (6) to secure oil pickup tube (7) on oil pan plate (3). Bend lock up.
Wipe surface of oil plate (3) clean.
Exposure to silicone RTV compound may be hazardous to your health. Contact with eyes can cause severe
irritation and burns. Compound can be absorbed into the skin and can cause irritation or skin sensitiza-
tion. Inhalation of vapors can cause respiratory tract irritation; prolonged inhalation can result in an aller-
gic reaction. Vapors are combustible. Do not use near open flame. Wear eye and skin protection and avoid
inhalation of vapors. Use only in a well-ventilated area. Failure to follow this warning can cause injury or
Lightly coat both sides of new gasket (4) with silicone
compound. Install gasket on oil pan plate (3).
To ensure a leak-free seal, ensure capscrews are
Position oil pan plate (3) onto engine block and secure
with 18 washers (2) and capscrews (1).
Install engine oil pump (WP 0033 00).
Install oil pan (WP 0031 00).
END OF WORK PACKAGE