ENGINE ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove two capscrews (11), washers (12) and O-ring
(13) and discard O-ring. Lower magnetic screen
assembly out of way.
Use caution to ensure fuel system does not
become contaminated. Install protective caps
and plugs on all lines as they are disconnected.
Contamination of fuel system could result in
Disconnect fuel supply line from primary fuel filter
Disconnect fuel return line from fuel injection pump
Disconnect fuel supply line from accessory drive housing (WP 0050 00).
DO NOT remove capscrews (14) on either side of the engine. Failure to follow this warning may result in
Make a final inspection to make sure oil lines,
hoses, wiring and clips are clear of engine and
Remove four capscrews (15) and washers (16) from
rear engine mounting brackets.
Remove two dash support brace mounting capscrews