 |
|||
|
|
|||
|
Page Title:
CHANGING ENGINE OIL - CONTINUED |
|
||
| ||||||||||
|
|
 TM 5-2410-233-23
ENGINE OIL AND OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0010 00
CHANGING ENGINE OIL - CONTINUED
WARNING
Never crawl under a running machine. Make sure engine is OFF. Failure to follow this warning may result
in injury or death.
12.
Install access cover assembly (2) and tighten cap-
screw (1).
1, 2
386-154
OIL FILTER REPLACEMENT
1.
Drain engine oil. See Changing Engine Oil in this work package.
NOTE
Capacity of oil filter is approximately 2 qt (1.891 1).
2.
Use a strap wrench to remove oil filter (10). Discard
filter.
3.
Clean bottom of oil filter base (9) with a clean rag.
4.
Apply a thin film of clean lubricating oil to gasket
9
on base of new oil filter (10).
5.
Install new oil filter (10) and tighten only until gas-
ket on base of new oil filter touches oil filter base
(9). Then tighten filter an additional 1/2 turn. Do not
overtighten.
10
6.
Fill crankcase with oil. See Changing Engine Oil in
this work package.
386-157
0010 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals