 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
OPERATE RIPPER- CONTINUED
e.
Rock With Fractures, Faults and Planes of Weakness. Use two shanks where rock breaks out in small pieces. If
tractor begins to stall or tracks spin, use only the center shank.
SHUT DOWN TRACTOR
1.
Position machine on level surface and decelerate engine to idle speed.
2.
Apply brakes and pull brake lock lever to engage brake lock.
3.
Move transmission selector lever to neutral (N).
4.
Move transmission safety lock lever to ON.
5.
Lower all implements to the ground.
6.
Turn off all accessories.
CAUTION
Shutting down engine immediately after operating under a load can result in overheating, accelerated wear
of engine components and damage to turbocharger. DO NOT shut down without idling engine for
appropriate time period.
7.
Move governor control lever to idle and idle engine for five (5) minutes.
8.
Move governor control lever all the way forward to shut down engine.
9.
Place battery disconnect switch in OFF position.
10. Remove all rocks, mud, dirt or debris clear of tracks.
11. Perform After operation PMCS (WP 0012 00).
CLEAN
386-708
CLEAN
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals