Fuel Tank Repair - TM-10-3930-633-340051

TM 10-3930-633-34

b. A variable resistance type of float and sender

b. Repair. Prior to repair of the fuel tank, remove

unit is mounted in the fuel tank and connected to a

combustibles from interior of tanks in accordance with

fuel gage on the instrument panel. The fuel filler cap is

TB 750-1047 (Elimination of Combustibles from

a safety type with an integral strainer.

Interiors of Metal or Plastic Gasoline and Diesel Fuel

Tanks).

4-2. Fuel Tank Repair

c. Installation. Refer to TM 10-3930-633-12,

a. Removal. Refer to TM 10-3930-633-12,

paragraph 4-47.

4-3. Carburetor Problem Diagnosis

Paragraph 4-3 has been rescinded.

The fuel tank must be thoroughly drained

and FLUSHED before any cutting or

4-4. Carburetor Description

welding is done on the tank surfaces. Fill

Paragraph 4-4 and Figure 4-2 have been

the tank completely with hot water to

rescinded,

drive out all vapors. Drain water and

4-5. Carburetor Repair

blow out tank with compressed air or

CO2. After welding, fill tank with water

Refer to TM 10-3930-633-12,

and check for leaks. Drain tank, steam

clean and dry thoroughly before

reinstallation.

(Pages 4-4 through 4-6 have been rescinded.)

Change 1

4-3