Recoverability Code - TM-10-3930-633-24P0009

TM 10-3930-633-24P

H-

General support is the lowest level that can do

specifications standards, and inspection requirements to

complete repair of the item.

identify an item or range of items.

L-

Specialized repair activity is the lowest level that

NOTE: When you use an NSN to requisition an item, the

can do complete repair of the item.

item you receive may have a different part number from

D-

Depot is the lowest level that can do complete

the part ordered.

e. DESCRIPTION AND USABLE ON CODE

repair of the item.

(UOC) (Column (5)). This column includes the following

Z-

Nonreparable. No repair is authorized.

B-

No repair is authorized. (No parts or special

information:

tools are authorized for the maintenance of a

(1) The Federal item name and, when

"B"-coded item.) However, the item may be

required, a minimum description to identify the item.

reconditioned by adjusting, lubricating, etc., at

(2) Physical security classification. Not

the user level.

Applicable.

(3) Recoverability Code. Recoverability

(3) Items that are included in kits and sets

codes are assigned to items to indicate the disposition

are listed below the name of the kit or set on Figure KIT.

action on unserviceable items. The recoverability code is

(4) Spare/repair parts that make up an

entered in the fifth position of the SMR code as follows:

assembled item are listed immediately following the

Code

Application/Explanation

assembled item line entry.

Z-

Nonreparable item.

When unserviceable,

(5) Part numbers for bulk materials are

condemn and dispose of the item at the level of

referenced in this column in the line item entry for the

maintenance shown in the 3d position of the

item to be manufactured/fabricated.

SMR code.

(6) When the item is not used with all

O-

Reparable item.

When

uneconomically

serial numbers of the same model, the effective serial

reparable, condemn and dispose of the item at

numbers are shown on the last line(s) of the description

unit maintenance or aviation unit level.

(before UOC). Not Applicable.

F-

Reparable item. When

uneconomically

(7) The usable on code, when applicable

reparable, condemn and dispose of the item at

(see paragraph 5, Special Information).

the direct support or aviation intermediate level.

(8) In the Special Tools List section, the

H-

Reparable item. When

uneconomically

basis of issue (BOI) appears as the last line(s) in the

reparable, condemn and dispose of the item at

entry for each special tool, special TMDE, and other

the general support level.

special support equipment. When density of equipments

D-

Reparable item. When beyond lower level repair

supported exceeds density spread indicated in the basis

capability, return to depot. Condemnation and

of issue, the total authorization is increased

disposal of item not authorized below depot

proportionately.

level.

(9) The statement "END OF FIGURE"

L-

Reparable item. Condemnation and disposal of

appears just below the last item description in Column 5

item not authorized below specialized repair

for a given figure in both Section II and Section III.

QTY (Column (6)). The QTY (quantity per

activity (SRA).

A-

Item requires special handling or condemnation

figure column) indicates the quantity of the item used in

procedures because of specific reasons (e.g.,

the breakout shown on the illustration/figure, which is

precious metal content, high dollar value, critical

prepared for a functional group, subfunctional group, or

material, or hazardous material).

Refer to

an assembly. A "V" appearing in this column in lieu of a

appropriate manuals/directives for specific

quantity indicates that the quantity is variable and the

instructions.

quantity may vary from application to application.

c. CAGEC (Column (3)). The Commercial

and Government Entity (CAGE) Code (C) is a 5-digit

Explanation of Columns (Section IV).

alphanumeric code which is used to identify the

manufacturer, distributor, or Government agency, etc.,

NATIONAL

STOCK

NUMBER

(NSN)

that supplies the item.

INDEX.

d. PART NUMBER (Column (4)). Indicates

(1) STOCK NUMBER column.

This

the primary number used by the manufacturer

column lists the NSN by National Item Identification

(individual, company, firm, corporation, or Government

Number (NIIN)

activity), which controls the design and characteristics of

the item by means of its engineering drawings,