Figure 4-13. Carburetor and linkage.

Figure 4-13. Carburetor and linkage.

4-37. Fuel Pump

b. Removal.

(1) Open hood and remove panel from right

a. Cleaning.

side of engine compartment.

(1) Lift and block front end of tractor to a

(2) Remove air cleaner (para 4-35 a ) .

suitable working height.

(3) Disconnect accelerator return spring from

(2) Close fuel shut-off valve at bottom of fuel

carburetor clip (fig. 4-13).

tan k.

( 4 ) R e m o v e c a r b u r e t o r r o d clip and

(3) Loosen nut (fig. 4-14) at bottom of bail

disconnect cross shaft to carburetor rod at car-

and remove bail, bowl, spring, filter element and

buretor throttle lever.

bowl gasket from pump. Discard gasket.

(5) Loosen screw and swivel nut on choke lever

Caution: Some gasoline will probably be

and disconnect choke cable.

spilled at this time from the bowl. Take

(6) Disconnect fuel hose at carburetor elbow.

precautions against fire.

(7) Remove stud nuts attaching carburetor to

(4) Rinse bowl and filter element in SD, and

g o v e r n o r and remove carburetor and mounting

reassemble, using a new gasket between bowl and

gasket. Discard gasket.

pump.

c. Installation. Reverse procedure in b a b o v e

(5) Open fuel tank shut-off valve.

using a new mounting gasket. With choke button

d e p r e s s e d , fully open choke plate and connect

choke cable to choke lever.